Upholstered Chair with Wood Arms

This upholstered arm chair blends modern and traditional styling to create a timeless piece. The upholstered seat and back are designed for comfort, with a soft curvature that provides lower lumbar support. The chair can be customized with a variety of fabrics, vinyl or leather. 

Dimensions: 28"W x 30"D x 38"H

Seat Height: 19"

Arm Height 22.5"

All fully upholstered items are manufactured using a mixture of hardwood and plywood. Hardwood is used exclusively on structural portions of the frame, while plywood is used on non-structural parts with very few exceptions. Exposed legs over 2 ¾” tall are integrated into the frame to increase strength and add durability versus bolt or screw on applications utilized on inferior products. Back springs are typically 11 gauge sinuous springs while seat springs, when applicable, are 8 gauge flat sinuous springs. Sleeper mechanisms are available in three quality levels, each carrying a different warranty period starting at three years for the standard mechanism and reaching five years for the professional series mechanism. A variety of mattresses are also available with various types of foam and varying coil counts. Standard poly foam for seat cushions has a density of 1.8 and a compression of 30lbs. Inside back poly foam has a density of 1.5 and a compression of 16lbs. Fiber wrap on seat cushions, when applicable, is typically 1” thick, has a density of 1.1, and a compression of 12lbs. This upgraded fiber prevents loss of seat cushion height, and prevents fabric from becoming loose on the cushion. The balance of poly foam used on the chair carries a density of 1.0 and a compression of 30lbs. All fully upholstered chair frames carry a two year limited warranty.

All wood framed chairs and luggage benches produced by Eaton are manufactured using kiln dried hardwood. Wood joints are double doweled and glued with epoxy type glue to increase strength and add durability. When stronger bonds are necessary on critical joints, pocket boring and screws are used. Corner blocks are attached with both glue and screws. Metal brackets are also utilized when necessary. Seats are offered as poly covered solid boards or poly covered spring flex boards. Typical poly applications for seat foam have density of 1.8 and compression of 45lbs. Back foam has a density of 1.8 and a compression of 26lbs. Wood chair frame components carry a 2 year limited warranty.